fo cable laying
DraftReference: RA-2026-VWtISVNC
Total Activities
4
High Risk
0
Medium Risk
4
Low Risk
0
📄 Method Statement
TSEdN85EIFeFq5KCTf5BMSQgjVrSDS6O9nAc7DJr.docx
Unknown size
docx
Task Risk Assessment Worksheet
Project
132 kv cable works
Client
Taqa
Consultant
Green
Main Contractor
El Sewdy
Subcontractor
Heliopolis
Activity
fo cable laying
Assessors
—
Project Manager
signature
—
HSE Engineer
signature
—
Project Manager
signature
—
Civil Engineer
signature
—
HSE Engineer
signature
Risk Assessment Matrix
| SN | Activity | Hazard | Consequence | Groups Exposed | Controls | Initial Risk | Additional Controls | Residual Risk |
|---|---|---|---|---|---|---|---|---|
| 1 | Site | 1. Vehicle movement and collision during transit/site access 2. Slips, trips, and falls on uneven ground or terrain 3. Manual handling injuries during offloading of testing equipment | Personal injury, property damage, environmental impact | Site Personnel, Subcontractors, Public | 1. Enforce site speed limit of 20 km/h and designated access routes 2. Mandate banksman/flagman for all reversing vehicles 3. Conduct site safety induction and toolbox talk prior to entry 4. Wear mandatory PPE (safety helmet, high-vis vest, safety boots, gloves) 5.sdasdasd asdsd dssad asds 6. adsdsad asdsad dads |
P
3
×
S
3
9
|
1. Implement site-specific Traffic Management Plan as per ADOSH SF CoP 27.0 (Building and Road Work Safety) 2. Conduct manual handling assessment per ADOSH SF CoP 14.0 (Manual Handling) 3. Verify third-party competency and licenses for drivers per ADOSH SF CoP 2.0 |
P
2
×
S
2
4
|
| 2 | Underground | 1. Contact with live underground electrical cables or pressurized utilities 2. Extreme heat and sun exposure during outdoor field scanning 3. Ergonomic posture strain from prolonged operation of GPR units | Personal injury, property damage, environmental impact | Site Personnel, Subcontractors, Public | 1. Review existing GIS/as-built drawings and obtain all relevant utility NOCs 2. Scan trial pit locations using calibrated cable avoidance tools (CAT & Genny) and GPR 3. Provide shaded rest areas, cool drinking water, and electrolytes 4. Implement work-rest rotation schedules during peak thermal conditions |
P
3
×
S
3
9
|
1. Strictly comply with ADOSH SF CoP 11.0 (Safety Structures - Working in Sun/Heat Stress) and UAE Midday Work Ban guidelines 2. Issue formal Permit to Dig / Work Permits as per ADOSH SF CoP 21.0 (Permit to Work Systems) 3. Deploy TAQA/ADDC competent persons to verify cable locator readings per TAQA System Safety Rules |
P
2
×
S
2
4
|
| 3 | Manual | 1. Cave-in or structural collapse of trial pit trench walls 2. Accidental strike on live underground services during digging 3. Flying soil particles and hand injury during manual shovel excavation 4. Excessive dust generation under dry conditions | Personal injury, property damage, environmental impact | Site Personnel, Subcontractors, Public | 1. Mandate hand digging (trial pits) around marked utility zones within 1 meter 2. Batter or shore excavation walls if depth exceeds 1.2 meters 3. Keep excavated spoil and heavy equipment at least 1 meter away from pit edges 4. Apply water spray for dust suppression and issue FFP2 dust masks 5. Erect physical rigid barriers and warning lights around open pits |
P
3
×
S
3
9
|
1. Execute excavation works strictly in accordance with ADOSH SF CoP 29.0 (Excavation Works) 2. Obtain Confined Space Entry Permit if excavation depth exceeds 1.5 meters per ADOSH SF CoP 28.0 (Confined Spaces) 3. Ensure valid third-party inspection certificates for mechanical excavators per ADOSH SF CoP 34.0 (Plant and Machinery) |
P
2
×
S
2
4
|
| 4 | In-Situ | 1. Sharp needle probe insertion causing puncture or skin laceration 2. Electrical shock from battery apparatus or power supply units 3. Thermal burns from heated probe tip during testing cycles 4. Tripping hazards over apparatus cables in work area | Personal injury, property damage, environmental impact | Site Personnel, Subcontractors, Public | 1. Inspect thermal needle apparatus, probes, and electrical wiring prior to use 2. Wear cut-resistant and thermal protective gloves during probe insertion/removal 3. Neatly route apparatus cabling clear of walkway paths 4. Ensure apparatus is operated strictly by trained and competent technicians |
P
3
×
S
3
9
|
1. Ensure all portable electrical testing equipment complies with ADOSH SF CoP 15.0 (Electrical Safety) 2. Provide task-specific PPE complying with ADOSH SF CoP 3.0 (Personal Protective Equipment) 3. Perform daily pre-use inspection logs as per TAQA HSP.31 requirements |
P
2
×
S
2
4
|
Likelihood / Frequency
| Descriptor | Likely Frequency | Probability |
|---|---|---|
| Frequent | Occurs frequently | 5 |
| Often | Occurs several times per year | 4 |
| Likely | Has occurred more than once | 3 |
| Possible | Has occurred | 2 |
| Rare | Never occurred | 1 |
Risk Matrix — Probability × Consequence
| Probability | Consequence | ||||
|---|---|---|---|---|---|
| Insignificant (1) | Minor (2) | Moderate (3) | Major (4) | Catastrophic (5) | |
| Rare (1) | 1 | 2 | 3 | 4 | 5 |
| Possible (2) | 2 | 4 | 6 | 8 | 10 |
| Likely (3) | 3 | 6 | 9 | 12 | 15 |
| Often (4) | 4 | 8 | 12 | 16 | 20 |
| Frequent / Almost Certain (5) | 5 | 10 | 15 | 20 | 25 |
| 15 – 25 | Extreme Risk | Activity or industry should not proceed in current form. |
| 8 – 12 | High Risk | Activity or industry should be modified to include remedial planning and action and be subject to detailed EHS assessment. |
| 4 – 6 | Moderate Risk | Activity or industry can operate subject to management and/or modification. |
| 1 – 3 | Low Risk | No action required, unless escalation of risk is possible. |
Activity Log
System
•
created
3 months ago